AQUA A10 Conference Theater Seat

1. The seat part of the seats will have the desired softness and will have a gravity-centered mechanism that will allow it to close automatically
2. The seats will be ergonomic in shape and appearance, the backrest unit, armrests, seat and foot will be mounted firmly to the seat frame, there will be no shaking or gaps in the connection system.
3. At least Ø16x1.5 mm pipe or at least 15x15x1.5 mm profile material will be used in the metal frames of the seat and backrests.
4. At least three pieces of sheet metal and at least two pieces of profile will be welded between the seat frame frames, in the backrests, and in the seats, to increase the strength of the frame.
5. The feet of the two-legged seats will be made of MDF material and beech veneer will be applied.
6. The armrests and foot connection parts of the seats will be manufactured from polished beech wood material
7. The assembly of the seat backs will be made with the boltless tight fit method to the mechanism made of Polyamide (PA) material mounted on the legs
8. In the seat and backrest units of the seats, 50 ± 10% density cast polyurethane sponge will be used, with the skeletons remaining inside the sponge.
9. The fabrics to be upholstered will be laminated in accordance with the flame method technique with a thickness of 5 mm
10. The seat and backrest sponges of the seats will not fall below 5 cm in the thickness of the thinnest part (both in the seat and in the reclining area) in the parts outside the air ducts and will have a hardness that will not cause permanent deformation. The sponge will be homogeneous and orthopedic throughout the entire surface. The sponges will have MVSS 302 European standard non-flammability
11. The seat and back sponges of the seats will be manufactured completely covered with fabric
12. The seats will be fixed to the floor with suitable fasteners. There will be no shaking or gaps in the seats.

13. All welding operations of the construction are made with gas welding and will be continuous at the joints. The weld seams of the exposed parts at the joints of the steel frame will be on the inner surfaces.

14. Burrs and roughnesses that will occur due to welding on the steel frame of the seat will be ground.

About Aqua A10 :

ِAqua A10 of theater seating embodies the charm of classical design, ensuring that the ambiance of your venue reflects the timeless beauty and grace of a bygone era. The use of top-quality wood in the aesthetics and finishes enhances the overall appeal of the seating, making it an ideal choice for venues that prioritize a traditional atmosphere.

Aqua A10's  attention  provide a seating solution that seamlessly blends with the architectural and historical significance of theaters, auditoriums, and opera houses. The rich wooden finishes add warmth and character to the space, contributing to an environment that exudes class and culture.

For venues where maintaining a traditional ambiance is essential, Aqua A10 stands as a testament to the enduring appeal of classic design and the elegance of high-quality woodwork. Whether you're looking to evoke the grandeur of a bygone era or create an atmosphere of timeless sophistication, Aqua A10 is the perfect choice for your seating needs  .